Proto Labs reports record Q3 revenue of $135.4 million, exceeding expectations with 7.8% growth and strong demand in key markets, signaling a positive outlook.

Greetings and welcome to Proto Labs' third quarter 2025 earnings conference call. At this time, all participants are on a listen only mode. A question and answer session will follow the formal presentation. If anyone requires operator assistance during the conference, please press Star 0 on your telephone keypad. As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Ryan Johnsrud, Investor Relations Manager. Thank you. Please go ahead.

Thank you operator Good morning everyone and welcome to Proto Labs third quarter 2025 earnings conference call. I'm joined today by Suresh Krishna, President and Chief Executive Officer and Dan Schumacher, Chief Financial Officer. This morning, Protolabs issued a press release announcing its financial Results for the third quarter ended September 30, 2025. The press release is available on the company's website. In addition, the prepared slide presentation is available online at the web address provided in our press release. Our discussion today will include statements relating to future performance and expectations that are or may be considered forward looking statements and subject to many risks and uncertainties that could cause actual results to differ materially from expectations. Please refer to our earnings press release and recent SEC filings, including our annual report on Form 10-K, for information on certain risks that could cause actual outcomes to differ materially and adversely from any forward looking statements made today. The results and guidance we will discuss include non GAAP financial measures consistent with our past practice. Please refer to our press release and the accompanying slide presentations at the Investor Relations section of our company website for a complete reconciliation of GAAP to non GAAP results. Now I will turn the call over to Suresh Krishna.

Suresh thanks Ryan Good morning everyone and thank you for joining our third quarter earnings call. I'm pleased to be with you today to discuss our strong results. We delivered record quarterly revenues and exceeded earnings expectations, highlighting the strength of our model and the power of focused execution. Before discussing our results in detail, I want to take a moment to share a few reflections from my first five months with Proto Labs'. Spending time in our facilities and with our customers and our partners has left me energized and confident in the opportunities ahead. We are focused on removing friction, expanding our offerings and deepening customer relationships. While it's still early, my short time here has strengthened my confidence that our current strategy delivering high quality custom parts throughout the product life cycle from prototyping to production, is the right one. We are in the midst of a comprehensive strategic planning process to identify specific initiatives and projects to accelerate growth and improve our operations. We are refining the details on how to achieve full realization of our strategy and I look forward to sharing more in 2026. Meanwhile, we are committed to delivering value with speed, clarity and discipline unlocking long term growth. Together with our teams I am focused on re accelerating revenue growth and ultimately positioning Protolabs for long term shareholder value creation. Now on to our third quarter results. Revenue grew 7.8% year over year to a quarterly record of 135.4 million and we had strong quarter of earnings that exceeded expectations. Our teams continue to execute with speed and focus driving strong financial results. I'd like to especially commend our US go to market teams whose continued commitment to customers and execution fueled another quarter of double digit revenue growth in the U.S. our record revenue was led by increased demand in our US CNC machining and sheet metal offerings supported by strength across several key end markets. First in aerospace and defense, we experience continued strong demand for mission critical precision parts in innovative areas like drones, satellites and space exploration. As you know by now, Protolabs works with the most prominent, innovative and fastest growing companies, Amazon being one of them. Our speed, precision, quality and reliability allow us to be a trusted partner to Amazon in several of its critical business units, notably drones and robotics. We have also supported Blue Origin with parts for their single launch lunar cargo lander among other projects. Blue Origin told us they continue to use Proto Labs' services due to our impeccable customer service and levels of detail and accountability. The second area of note for us is industrial and commercial machinery. This segment also performed well with notable activity in robotics and semiconductors. In addition, overall Protolabs CNC machining revenue was driven by very strong network fulfilled growth. I want to acknowledge our Proto Labs' network teams for their excellent execution through periods of significant tariff uncertainty and implementation challenges. Our teams manage through uncertainty and increased demand while reducing customer friction and driving higher sequential network gross margins. These results demonstrate our ability to execute well and deliver strong performance across our target industries. Now shifting to our two key performance indicators where we made significant improvements. Third quarter revenue per customer increased almost 15% year over year as we continue to drive increased share of wallet with our large and strategic customers. I am very encouraged by the traction we are seeing in deepening customer relationships and I can tell you anecdotally that our large enterprise customers want to do even more with Proto Labs'. Adoption of our combined offer continued to expand in this quarter with customers utilizing both factory and network fulfillment in the last 12 months up 35% versus the prior quarter. As we continue to serve more customers and remove customer friction, this is showing up in accelerated demand in fact, due to strong demand, we are expanding CNC machining capacity in our factories, a signal of momentum and confidence. We expect this investment to generate meaningful return. I know we can do more for our customers. Over the past several months, we have worked to significantly expand our factory CNC machining service. You might have seen a press release announcing the launch of advanced CNC machining capabilities a few weeks ago. If you haven't, I'd encourage you to check it out. We listened to our customers and heard loud and clear that they require advanced manufacturing capabilities from Proto Labs'. These capabilities include tighter tolerances for added precision, diverse finishes to strengthen and cosmetically improve parts, and fast, comprehensive quality documentation. Further, these services are all now available via our protolabs.com commerce ordering platform. This is an example of our commitment to removing friction and we will continue to invest in improvements like this to drive demand Moving to a broader commentary about our business As I noted in our last earnings call, I believe we have great talent and a great culture. I want to build on that culture by continuing to bring in and retain top talent. We are proud to be named one of America's Best in State Employers in the 2025 by Forbes, recognizing our strong workplace culture and commitment to our employees. In addition, in early October we announced the appointment of Mark Kermish as our Chief Technology and AI Officer. This move helps strengthen our leadership team. Mark will lead our technology teams through protolab's next chapter. He brings a strong track record in digital transformation and AI strategy and his addition underscores our commitment to these areas. We've been using AI and machine language at Proto Labs' for a long time. Now. As part of digital Manufacturing, Mark will lead our tech teams as we further embed AI and automation across our operations, driving both efficiency and better customer outcomes, both of which are central to our strategy. We will continue to strengthen organizational capabilities to support our growth initiatives. Before passing the call over to Dan, I'd like to make some closing remarks. As I mentioned earlier, we will provide more details on strategic initiatives in 2026, but sharpening our execution and improving the customer and employee experiences are essential. Our focus is clear. Accelerate profitable growth. I am very encouraged by the progress we've made over the last two quarters. We have accelerated revenue growth and exceeded expectations on earnings. We have significant momentum into year end. I can feel it in our manufacturing facilities and in conversations with our sales teams across all of our offices. I could not be more confident in Proto Labs' ability to execute with speed, discipline and innovation as we deliver long term value to our customers and shareholders. With that, I'll turn it over to Dan to walk through the financials. Dan.

Thanks Suresh and good morning. I'll start with a brief overview of our third quarter results followed by our outlook for the fourth quarter. Third quarter revenue was a company record $135.4 million, up 7.8% year over year or 6.8% in constant currencies. Revenue fulfilled through Proto Labs network was $30.1 million, up 16.2% constant currency third quarter CNC machining revenue grew 18.2% year over year or 17% in constant currencies. As Suresh stated, we are seeing very strong demand for our CNC machining services across several key end markets, most notably drones, satellites and space exploration. In the US CNC machining revenue grew 24% year over year. Injection molding grew 2% year over year or 1.2% in constant currencies. As we saw strong demand for network fulfilled injection molding services offset by weak prototyping demand. 3D printing revenue declined 6.3% year over year or 7.1% in constant currencies driven by weak demand. In Europe, sheet metal grew 13.9% year over year or 13.3% in constant currencies fueled by solid growth in most end markets. Revenue in the US grew 10% year over year while Europe revenue declined 5% in constant currencies. Like many manufacturers, we are seeing the effects of continued contraction in European manufacturing activity shifting to margins. Third quarter consolidated non GAAP gross margin was 45.9%, up 110 basis points sequentially. We delivered sequential gross margin improvements in both the factory and the network. Non GAAP operating expenses were $48.6 million or 35.9% of revenue, down 30 basis points from 36.2% of revenue in the second quarter. As we generated sequential efficiencies on our SG&A costs on a year over year basis, SG&A was up $4.2 million. The majority of that year over year increase was in variable expenses tied to revenue growth including incentive compensation and commissions. Third quarter adjusted EBITDA was $21.1 million or 15.6% of revenue. Non GAAP earnings per share were 47 cents, up 6 cents sequentially. The sequential improvement was primarily driven by gross margin expansion compared to the third quarter of 2024. EPS was flat as increased volume was offset by higher incentive compensation and commissions expenses. We generated $29.1 million of cash from operations during the third quarter. Proto Labs continues to lead the digital manufacturing industry in cash generation. Reflecting the strength of our business model, we returned $12.8 million to shareholders in the form of repurchases. On September 30, 2025, we had $138.4 million of cash and investments on our balance sheet and zero debt. Our outlook for the fourth quarter of 2025 is outlined on slide 12. We expect revenue between 125 and $133 million at the midpoint. This implies 6% revenue growth year over year. We expect foreign currency to have a $1.5 million favorable impact on revenue compared to the fourth quarter of 2024. Moving to earnings guidance, we anticipate non GAAP add-backs in the fourth quarter to include stock based compensation expense of approximately $3.9 million and amortization expense of $900,000. We currently estimate a non GAAP effective tax rate between 23 and 24% in the fourth quarter. In summary, we expect fourth quarter non GAAP earnings per share between 30 and $0.38. That concludes our prepared remarks. Operator, please open the line for questions.

Thank you. The floor is now open for questions. If you would like to ask a question, please press Star 1 on your telephone keypad at this time. A confirmation tone will indicate that your line is in the question queue. You may press Star 2 if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up the handset before pressing the star keys again, that is Star 1 to register a question at this time. Today's first question is coming from Greg Palm of Craig Hallam. Please go ahead.

Yeah, good morning. Thanks for taking the questions. Suresh. A lot of your prepared remarks revolved around this idea of accelerated growth. But I don't think a lot of investors think of Proto Labs' as a growth company just given the history over the last seven to eight years. So just help us understand what's the opportunity, what's the potential growth rate for the company longer term?

Yeah, thanks again for that question. We are, we are very focused on driving growth. Our last 2/4 would indicate that we've been above 7% 2/4 in a row. We are working on our new strategic plan and we, as I said in my prepared remarks, will come out and share that with all of you in 2026. In the meantime, we are focused on listening to our customers, understanding our friction points, removing those friction points and providing them what they need. And you know, we are very focused on delivering products across the entire product life cycle. All of these are resonating with our customers. And as we focus on executing those, you know, we will, we will continue to evolve our strategy with our strategic plan that we will announce in 2026. The confidence we have in future growth is things we are doing right now are resonating very strongly with our customers.

And is it fair to assume, I mean, are you seeing any of that right now or are you more or less riding the wave of growth of some of your end markets like A and D? I'm just trying to get a sense of like what company specific initiatives can happen that can translate into a step up in the growth rate.

Yeah, you know, we gave, we shared one example of advanced machining capabilities that came directly from listening to our customers. And we have a few others that we are working on that we will share more details when we come back to you in 2026. But to be clear, we are seeing growth across several industries. It's not just aerospace and defense. We are seeing. We serve 50,000 customers a year. We are the supplier of choice for anything that has to do with innovation. And there is a lot of innovation happening across a wide variety of industries today. So while we are seeing good growth in aerospace and defense, we are seeing very good growth in different industries as well. And innovators, whether they are in their garage or they are big Fortune 500 companies, we are their destination because they want to go with speed and innovation. And we are the best partner for that. So we are very diverse in our customer base.

Okay, understand. And then just last one on the CNC expansion, what is the capex requirement associated with that? Is that just more machines? Is that a facility and sort of where are we in terms of that build out right now? Yeah, Greg, thanks for the question. This is Dan. We're fine from a facility perspective. This is just continuing to add mills. I mean, with our digital manufacturing model, we can expand very quickly just by adding mills to the facility. I know you've been out to our Brooklyn park facility. We can simply add mills and be able to continue industry leading fast lead times by doing that. So it's an equipment purchase. Okay. All right. Thanks for taking the questions and best of luck. Thank you.

Thank you.

Thank you. The next question is coming from Troy Jensen of Cantor Fitzgerald. Please go ahead.

Hey gentlemen, congrats on the nice results. Thanks, Suresh. Thank you. Hey, so Suresh, for you. I know you called out, you know, record revenue per unique developer, but the unique developer number was down on a year over year basis. It looks like it's at least a three year low. So can you just talk about new developers and not just growing the services you're offering, but it just seems like this is the market you guys should be growing unique developers, not shrinking them.

Any thoughts on that, please? We are absolutely focused on growing our customer base. We, we are definitely seeing the efforts that we are putting right now is growing share of wallet and that's what we are focused on. But we are definitely looking to increase our customer base overall. And when you serve 50,000 customers and our focus is right now on growing share of wallet, that's where we are seeing results. But we are absolutely focused on increasing our customer base as well.

All right, understood. And then can you just talk about just cross selling? I think Rob used to provide us data points on percentage of customers that are using both factory and network. So I think we mentioned in the script that that's up 35% year over year of those customers that are, you know, In a trailing 12 months have ordered from both the network and the factory. You know, the key here is, you know, what type of, what type of conversation are we having with the customer? The customer is going to upload their CAD file and we can have a holistic discussion with them about what's important to them. Is it, do they need fine details in terms of what their part is? Do they need it right away? Can they wait longer? What price point are they looking for? And that's really what that metric is all about is our ability to have that broader conversation with the customer and win more business for Proto Labs. Got it. All right guys, good luck going forward here.

Thank you.

Thank you. The next question is coming from Brian Drab of William Blair. Please go ahead.

Hi, good morning. Thanks for taking my questions. I can hear the cold in my voice as I'm starting to talk this morning. With the advanced CNC machining capability, how automated is that going to be or how automated is it? I see that you're talking about the ability to evaluate 2D drawings. Is that type of evaluation automated? And just what were some of the challenges in bringing that additional level of service online?

Yeah, this is as I indicated in my prepared remarks. It's tighter tolerances, it's different kind of finishes that our customers want and then improvements in quality documentation. And we've automated all that by putting everything on our website so people can just order it on protolabs.com as an E commerce transaction. So we've made the entire thing a digital thread. In the past it would have been more manual and and we made it a digital thread, removing the friction for our customers.

So I guess specifically if I give you a 2D drawing that has 400 tolerances on it, is the system is taking into account all 400 of those tolerances automatically or do you have some level of manual evaluation of that by an engineer?

You know, the website will walk you through with drop down menus on all the things that you want to specify. So as a design engineer you can go in and interact with the website to be able to decide what is needed, what you need, all the way into quality documentation. So you know, that way it's all digital and we don't need any manual intervention. Now we always have application engineers available for a conversation and many other, many of the customers do use that. And that way if they have any clarifications, those are all sorted out. But that is available for everything, whether it's for advanced or for regular. That service is available for all our customers.

And then how is that, how are you thinking about pricing of that level of service relative to what I assume the customers could have gotten historically anyways through the Proto Labs network? Maybe just having to wait a little bit longer. But I think you have partners probably available on that network. Yeah. So Brian, a couple things on it. It's very automated on the front end. But if it's tripping into something that is very specific in the customer needs, we do have people that are responding to the customer making sure that we have their parts and the parts that they need. It's a very competitive offer in the 5 to 10 day lead time space. So we, you know, we can do, you know, complex CNC parts very competitively from a pricing perspective in that five to ten day space. Okay, got it. And then just, I guess maybe just one more for now. Suresh. After you've been there for five months and you see how the CNC business is just booming. But the injection molding business, which was the legacy, obviously the legacy growth driver for many years, that business is still relatively flat lately. What do you think about the medium term prospects for that business to get the growth going there again?

Yeah, there is reduced prototyping activity in that space which is driving some of the softness that and it has been for the past few years. But we are definitely focused on the three service lines and the sheet metal which is only us based in both our geographies. So you know, as we come out and talk to you in 2026, we'll talk about more specific initiatives on what we are doing. It is as you said, a legacy business for us. But it's a very, very good business and we've been known for that. And we'll redouble our efforts for growth in all our service lines.

Okay, thanks very much. I'll follow up more later.

Thank you. The next question is coming from Jim Rashuti of Needham and Company. Please go ahead.

Hi. Thank you.

Good morning. First, congrats on the results and the margin improvement. Just wondering what were some of the puts and takes in the gross margin performance in the quarter? Volume I'm sure played a role, but did you see much improvement in the network gross margins? And I don't think I heard you talk at all about tariffs, so I'm guessing that was not an issue. But just in general, did you break out the network gross margin? We did not, but network gross margins were around 33% in the quarter. So Jim, you might recall from last quarter, we talked about the change in tariffs and how that negatively impacted our U.S. network margin. We give the customer a price when they order it and we hold to that price. So we could have a 30 day worth of backlog that the cost goes up on it due to pricing and you'd have a negative margin impact. We were successfully able to implement changes both to our pricing and our sourcing algorithms so that in the third quarter, even though tariff costs were still up, we were able to improve our margins quarter over quarter in the network. So it was about 80 basis points quarter over quarter. That was just due to the improvement in the network margins. Outside of that, we saw improvements in our factory margin as well. One main driver of that is revenue in Europe was up quarter over quarter. And with that increase in our Europe factory revenue quarter over quarter, we were able to operate those plants more efficiently in the third quarter. So those two things combined. So both factory margins being up and network margins being up Contributed to our 110 basis point improvement second quarter to third quarter in gross margins. Got it. That's helpful. Thank you. When you look at the progress that you're making in the revenue per customer, that growth that you're seeing, I wonder if you could help us understand where the biggest benefits are coming from. Are they coming from? You highlighted a couple of key verticals. Obviously there's a lot of activity in the drone space, in the robotics space. You know, are these, are you seeing growth in this area just in the revenue per customer? Is it coming from the well established Proto Labs customer that you've been working with for a long time, or is this coming perhaps from more recent customers that have just been more receptive to your production capabilities. Just trying to understand what's driving that because it is noteworthy, I think.

Yeah, that's a great question. We are seeing improvements from new and existing customers and we are seeing this, what I would say, share of wallet increase across different industries. As I said even earlier, we are very diverse customer base. And while we are seeing good strength in the sectors you mentioned within aerospace and defense, which is around drones, satellites, space, we're also seeing in industrial areas like robotics, semiconductors, consumer electronics. So we are seeing the benefits of focusing on customer voice and turning around and responding to that. And that's what is helping us improve our share of wallet. Dan, you want to add anything?

Yeah. Also would like to say we reorganized from a go to market perspective at the start of the year. We talked to you guys about that. The Americas sales team is performing extremely well. They're having in depth conversations with customers about what their needs are and how we can better fulfill those needs. And that interaction as well is helping us to serve those customers more holistically. And that is showing in that metric where how much a customer is purchasing for us from us is increasing.

Got it. Thank you.

Thank you. Ladies and gentlemen. This concludes today's question and answer session and today's conference call. We would like to thank you all for your participation. You may disconnect your lines or log off the webcast at this time and enjoy the rest of your day.